Here is a short list of the hardware used in UTM-1 / Power-1 / Smart-1 appliances.
If you take the appliance hardware together with the throughput stated by Check Point, it might give you an idea how your OpenServer hardware will perform in comparison.
The details can be determined from the command line.
For the CPU details use cat /proc/cpuinfo, for the RAM details use cat /proc/meminfo.
If you have more details on UTM-1 appliances, feel free to send them to blog@lachmann.org
UTM-1 130
- Intel Celeron M 600 MHz
- 1 GB RAM
- 80 GB ATA HDD
UTM-1 270
- Intel Celeron M 600 MHz
- 1 GB DDR2 RAM 400 MHz
- 160 GB ATA HDD
UTM-1 450
- Intel Celeron M 1.5 GHz
- 1 GB RAM
- 80 GB ATA HDD
UTM-1 570
- Intel Celeron M 1.5 GHz
- 1 GB RAM
- 160 GB ATA HDD
UTM-1 1070
- Intel Celeron M 1.5 GHz
- 1 GB RAM
- 160 GB ATA HDD
UTM-1 2050
- Intel Pentium 4 3.4 GHz
- 2 GB RAM
- 80 GB ATA HDD
UTM-1 2070
- Intel Celeron 440 2.00GHz
- 2 GB RAM
- 160 GB ATA HDD
UTM-1 3070
- Intel Core2 Duo E6400 2.13GHz
- 3 GB RAM
- 160 GB ATA HDD
Power-1 5070
- Intel Xeon E5410 2.33GHz (QC)
- 2 GB RAM
- 80 GB ATA HDD
Smart-1 25
- Intel Core2 Duo CPU T7400 2.16GHz
- 3 GB RAM
- 4x 500 GB SATA HDD in RAID 10
Thanks to all the contributors for their info!
Tobias Lachmann